Smart blinds
Smart blinds are ideal for when your hands are full or for when you simply prefer to stay where you are.
You will not need an electrician to install the blinds. Just decide if you want to have your Smart blinds controlled by a remote control or via our IKEA Home smart app, and then follow the guide here to enjoy a more comfortable everyday life
Smart blinds with remote control
![](https://img.youtube.com/vi/qY7Q-3Bc-eo/maxresdefault.jpg)
Smart blinds with IKEA Home smart app
![](https://img.youtube.com/vi/i_2jqm-9k6E/maxresdefault.jpg)
Installation
Control and steering
With remote control
With IKEA Home smart app
Pairing
With remote control
With IKEA Home smart app
Batteries and recharge
Factory reset
Warranty
About the repeater
The difference between the blinds
FYRTUR
- Roller blind
- Block-out blind
KADRILJ
- Roller blind
- Filtering light
TREDANSEN
- Cellular blind
- Block-out blind
PRAKTLYSING
- Cellular blind
- Filtering light
Troubleshooting for Smart blinds
The Smart blinds are not working, what should I do?
After plugging in the signal repeater for the first time, it might take a few minutes before it starts to communicate with the remote control and blind. This can also happen after a power cut or if the repeater is unplugged.
Use the remote to roll the blind up or down. If the blind doesn’t move or the remote isn’t responding, try these four steps:
Installing the batteries
![](https://img.youtube.com/vi/6HUsb9CvxAs/maxresdefault.jpg)
- Unscrew the back of the remote and press the battery into the slot.
- Leave the back open for now; we’ll come back to this when resetting and pairing.
- Make sure the battery pack for the blind is in position and that the blind and signal repeater are powered on. Use the remote to roll the blind up or down
- Press the down button on the remote to roll the blind down. If it doesn’t move, try the next step: Charging the battery pack. Rolling the blind down as it is
Charging the battery pack
- Connect the battery pack to the signal repeater using a USB cable and leave it to charge.
- Once fully charged, the light will turn off and the battery pack is ready for use.
- Disconnect the battery pack and slide it back into position inside the frame. The blind will roll all the way to the top once complete.
- Use the remote to roll the blind up or down. If it doesn’t move, try the next step: Resetting
Resetting
The remote control, signal repeater and blind all need to be reset. Follow the instructions below to start resetting.
Reset the remote control
![](https://img.youtube.com/vi/5VNrD4Pzxds/maxresdefault.jpg)
- Press the pairing button 4 times within 5 seconds.
- Red LED lights will blink when the reset is complete.
Reset the signal repeater
![](https://img.youtube.com/vi/Rq6UBftnyjY/maxresdefault.jpg)
- Push a pointed object into the pinhole on the signal repeater. Press down, hold for 5 seconds and then release.
- Once you release the pinhole, a white LED light will blink 4 times to show that the reset is complete.
- If the light doesn’t blink, please push the pinhole again to try another reset.
Reset the blind
![](https://img.youtube.com/vi/bjWjBpbyTQo/maxresdefault.jpg)
- Press and hold both buttons on the frame for at least 5 seconds.
- A white LED light will blink when the reset is complete.
- When you are ready, move to the next step: Pairing
Pairing
The remote control first needs to be paired with the signal repeater, and then with the blind.
Pair the remote and signal repeater
![](https://img.youtube.com/vi/3BdwrM5sKfc/maxresdefault.jpg)
- Hold the remote control close to the signal repeater.
- Press and hold the pairing button on the remote for at least 10 seconds.
- Red LED lights will pulse while pairing and then blink when pairing is complete.
Pair the remote and blind
![](https://img.youtube.com/vi/jgipcG4yRkI/maxresdefault.jpg)
- Quickly press both buttons on the frame to awaken the blind. A white LED light will confirm once it is active.
- Hold the remote control close to the pairing icon on the frame of the blind.
- Press and hold the pairing button on the remote for at least 20 seconds. Red LED lights will pulse while pairing and then blink when pairing is complete.
- The blind will roll slightly down and up again when pairing is complete. You can now use your remote to control the blind.
Download the IKEA Home smart app
Download the app to control your IKEA Home smart products together with the TRÅDFRI gateway.